Nandpro 2 0d Google
Nandpro 2 0d Google Chrome
Dump/Read the NANDBefore dumping your NAND, it’s probably a good idea to update your xbox to the latest dashboard version. You can do this via Xbox Live, USB key or CD. This is not needed, but it’s probably quicker to get it out of the way now, and will save you and extra step at the end of the guide.
DO NOTupdate to any higher version than this guide is based on, just in case MS release and update that can disable this hack. Bad Blocks?If bad blockswere found while dumping your NAND Open one of your NAND dumps in 360 flash dump tool 0.97Don’t worry if it says BADKV all over the place, this is normal because you haven’t entered the CPU Keyyet. Create your XeLL/ECC Glitch imageCopy your nanddump.bin file from the nandpro3folder, to 360MultiBuilderDatamy360Launch Run.exe from the 360MultiBuilderfolderPress the number corresponding to your motherboard revision, and hit Enter You will get a warning saying The file “ cpukey.txt” is missing.This is normal as we haven’t created it yet.
Press any key to continue.Sit back and watch 360 Multi Bulider do it’s stuffPress any key to close 360 Mulit BuilderYour Image00000000.ecc file has now been created in 360MultiBuilderData. Create your NAND ImageMove cpukey.txtto 360MultiBuilderDatamy360Launch 360 Multi Builder again and press the number corresponding your motherboard revision.You may get a message informing you that “ No fcrt.bin found in this nand.“This is not uncommon, and is nothing to worry about, so just continue.Just for completeness, here is what it looks like if your NAND does contain fcrt.binAgain, just press Enter to continue.You are now given the option to create a Glitch image, or a stock NAND image (Retail MS). For the purpose of this guide, you want to choose 1Press 1 again, choosing to build the image with DashLaunch patches included (highly recommended), and hit EnterNow that Multi Builder has your NAND dump and CPU Key, it will use xeBuild to create your new “hacked” NAND image ( nandflash.bin) and save it in 360MultiBuilderData(image – xeBuild Finished. Have a nice day)(image – recommended flashing method). Flash your NANDCopy nandflash.bin and xenon.elf from 360MultiBuilderDatato a USB keyIf the console is still running, with XeLL on screen, insert the USB key now.XeLL-Reloaded will find xenon.elf and use it to flash nandflash.binto your NAND. (if not, turn the console off, and on again)(again, still no need to boot with the eject button at this time) Once you see “ Image written, shut down now!” on your screen, turn off the console and remover the power for at least 30 seconds, and remove the USB key.You can use this time to put the motherboard back in the cage, and reconnect your HDD, and DVD drive.Replace the power, and boot the console. You are now running a hacked dashIf all is well, fully reassemble the console.
Install the game. Sound hardware: Directx 9 SupportInstructions:. Scp containment breach 1.2.3 download. Download and extract with Winrar.
FAQCOMING SOON(that’s what she said)WaffleThanks to blackwolf over at EMS for a large hunk of this guide, taken from here and anybody else I may have nicked bits from, here and there And obviously a huge thanks to everybody involved in making all this even possible, not least of course, the legend that is gligli.This was just compiled and edited to fit my own needs, but I thought If I padded it out a bit, it may be helpful to others who have the same TX based setup.If there is anything I have left out, or something I have totally butchered (bad blocks section?), pull me on it, so I can fix it.
I had enough of the 'loose screws' threads all over this forum.